New 95 cbm chemistry tank wagon, particularly built and laid out for the transport of chemistry products after the following description and in all other respects after the
technical appendices and attached documentations. Permission : EBA/(EBC), alternatively BMVIT (Austria) Delimitation : UIC 505-1, RIV / TSI able,
Short description:
The tank wagon with two bogies and new steel tank is intended for the transport of chemistry products. It corresponds to the demands of UIC and RIV and is certified for
the transport chemistry products. The wagon is grounded after UIC regulations for this category. All footsteps, holder and safety-relevant mechanisms correspond to the newest conditions and designs.
Dimensions:
• Wagon length total : 17,000 mm
• Number of axles : 4 pieces
• Pivot distance : 11.460 mm
• Distance outside wheels : 13.260 mm
• Overhang : 2.150 mm
Structure of wagon frame:
The wagon under frame is composed of steel sections. The profiles are connected by
welds to a stable construction and carry the tank. This is connected as firmly connected,
basic element with the wagon frame, whereby the wagon receives a higher stability and
firmness. The subcarriers take up the boogie pans and other elements.
Kind of steel DIN : S355J2G3 (extremely tough and not rust susceptible)
Push / pull equipment:
e.g. Keystone / Schwab
• Buffer : Type 105 A
• Clutch : Screw-coupling UIC Std. 670/1000NM
• Hook : UIC Std. 670/1000 Nm
The boogie:
Y25 standard boogie with headcarrier, reciprocal deceleration
• Design : Y 25 Lsd1
• Kind of wheel set : 920 mm R7T/A1N monobloc / fullmetal
• Wheel set supplier : BONATRANS, RAFIL, CAF, LUCCHINI, GHH,
• BOHUMIN
• Axle base : 1,800 mm
• Axle load : 22.5 t
• Spring elements : Spiral spring sets
• Wheelset bearing : WJ/WJP 130x240, SKF/FAG with plastic cage, labyrinth seal
sealing, wheelset bearing
• housing DB design
• Grounding : each axle to the car body
• Track width : 1,435 mm
Weights:
• Dead weight : 24,500 kg approx.
• maximum payload : 65,500 kg approx.
Load limits:
• Classification STR. A : 48.6 t
• Classification STR. B : 56.0 t
• Classification STR. C : 65.5 t
Speeds:
• V max empty : 120 km/h
• V max load : 100 km/h
Brakes:
Design : Dako compressed air brake in accordance UIC
• Type : DAKO-GP-16 "
• Brake cylinder : 16 "
• Brake valve : DAKO
• Load change : 2 level pneumatically
• Linkage plate : DAKO
• Hand brake : UIC 543, UIC of 544-1, affecting to both boogies
• Compressed air tank : 150 l
• Main ait pipe : 5/4 "
• Air shut-off valve : DAKO/LH3
• Brake wedge sole : according to UIC
Paint finish & frame protection:
• Preparation : Cleaning, airblast SA 2,5
• Corrosion protection : 60 µm basic paint
• Top coat : 60 µm, ral 9005 paint(highly shining)
• Total coating thickness : drying min. 120 µm
• Lacquer supplier : Company "Relius Coating" Oldenburg
• Logo : Logo and CI is given by customers reciprocal at the tank
• Inscription : After UIC-RIV
Tank boiler:
• Volume : 95 m3/94800 litres
• Material : S355J2G3
• Wall thickness tank coat : 6.50 mm (- 0.00/+0.50), inclusive c2
• wall thickness tank soil : 6.50 mm (- 0.00), inclusive c2
• Tenacity : 355 Mpa
• Tank length : 14,900 mm
• Tank width : 2,900 mm
• Tank ends shape : Hemispheric soil according to DIN 28011, one-piece
• RID calculated pressure : 4,0 bar, additionally TÜV preliminary test with 10,0 bar
test
• Positive pressure : 4,0 bar permissible
• Operating positive pressure: 3,0 bar permissible
• Outside positive pressure : 0,4 bar
• Ex firmness : In accordance with TRT
• Corrosion addition c2 : Min. 0.50 mm
• Welding factor tank : 0,8 (in accordance with technical set of rules)
• Emptying of residue : 1,0° degree, simply, central
• Max. residue in the tank : Max. 2 litres (without sump hollow)
• Stabilization rings : hollow profile rings, 6 pieces and/or after computation
• Coating inside : without
• Manufacturer tank : RT-Group / VRZ KARLOVO
• Certificates : All necessities in accordance with the valid regulations, including the
material and construction specifications, RID, EN, DIN, UIC, RIV
Manufacturer:
• RTC-PARTNER
• Guideline standard UIC/RIV/RID/UIC 532/UIC 235-2/UIC 575/
• Standards Certifies for the welding engineering.
• TÜV DIN 6700-2
• EN-288-3, EN 287-1,DIN 18800-b
• Certifying ISO 9001-2000
Warranty
• 48 month after supply date
Professional seller
