Brand new build two tise tipping rail car "Fans", made in Europe, build in best Quality by RTC
UIC, RIV / TSI approved
Single-hopper bulk tipping wagon with four wheelsets and pneumatic actuation. The tipping process is initiated by an actuating device on the side opposite the tipping direction. The bottom flap acts as an extension chute during tipping.
The vehicle frame is composed of a box-shaped solebar and two headstocks as well as a total of four flanged beams for supporting the bogies. The headstocks have fixed tension stops to accommodate the draw gear. The body consists of end walls, side flaps, a rocker bearing locking mechanism, sides, the rods for the hopper door and the pneumatic tipping device. There are bearing points on the underside of the body that connect to the vehicle frame.
Bearing points inside the end walls accommodate the central bolts for the rods of the hopper doors. The upper corners of the end walls feature bearing points to accommodate the side flaps, while the outer solebars of the body frame have hinge plates to secure the sides.
The lever mechanism for automatically opening and closing the sides during the tipping process is located in the two end walls of the body. For unloading, the wagon is equipped with three tipping air reservoirs of 150 l each, which have to be topped up from the main air reservoir pipe during train journeys. The filling time from 0 to 7 bar is approx. 60 minutes. The wagon may only be operated by instructed and competent personnel in compliance with the applicable operating instructions.
Production line: 30 rail cars each month
The image serves to visualize the design and characteristics of the freight wagons!
If you are interested in this offer, we will gladly prepare an indicative offer for you, to which the technical and commercial framework conditions will be finalized according to customer requirements.
Options
- The vehicle can also be offered with two separate charging boxes instead of one large one. This allows two separate products to be transported on one freight wagon.
- It is possible to supply the upper carriage bodies for use with AAR bogies and AAR couplings, for example for the US market.
Professional seller
